Subject: You got to see this:
From: Rotary Engine
Date: 6/13/2007, 7:02 AM
To: AARotary Engine

Bulent Wrote:

TOMORROW'S RECORD BREAKER
Contributed by David Rose - La Jolla, CA

The new RP-4 aircraft shown here, is being built to attack the  World 3, 15 and 100 Kilometer Speed Records.


Engines: Two high performance V-8 engines power the RP-4,  representing the best compromise among size, weight, power and  availability. Tandem mounted, each engine drives its own propeller.  The front engine drives the front prop directly and the rear  engine, through gearboxes which bypass the front engine, drives the  rear prop in contra rotation. Independent fuel and cooling systems  allow for single engine operation.

Propellers: Utilizing NASA Unducted Fan Technology, two four-blade  propellers with variable pitch hubs were constructed. The blades  consist of 84 layers of prepreg carbon fiber and are 58 inches in  diameter.


Cooling: During engine warm up, thermostats cycle engine water  through the oil sump heat exchanger to quickly bring engine oil to  operating temperature. Once up to temperature, the thermostats then  direct engine water to a series of aluminum tubes within the wing.  These tubes are immersed in 50 gallons of water which carry engine  heat to the wing surfaces which are cooled by the slipstream.  Separate series of tubes are provided for each engine enabling  autonomous cooling of either engine. Wing water can be diverted  through an auxiliary radiator located in the tail cone for cooling  on the ground if needed. The forced induction systems generate high  inlet temperatures and induction air is directed through  evaporators charged by air conditioning compressors. This system  also provides conditioned air to the cockpit.

Fuel: A 100 gallon fuel cell below the wing supplies fuel to engine- driven pumps which feed the injectors.

Gear: All gear retract aft into the fuselage. The main gear  articulates as it retracts holding the wheels parallel to the  fuselage throughout retraction.

Wing: The RP-4 wing is one of the most complex ever constructed.  Less than 3 inches at its thickest point, it nevertheless contains  flaps and ailerons as well as 200 feet of tubing and nearly 400  fabricated fittings and connectors which comprise the cooling systems.

Fuselage: Built entirely of large diameter chrome moly tubing, the  fuselage is skinned in 60 thousandths aluminum and is 31 inches in  diameter.

Empennage: The vertical and horizontal stabilizers are, like the  wing, both riveted and bonded together. The vertical stabilizer  houses the nav/comm antennas as well as pitot and cockpit  ventilation systems.

Performance: The RP-4 is designed to be a high performance aircraft.

Eric Hereth, master machinist, fabricator and welder, built all  components of this remarkable aircraft from scratch, with the  exceptions of engine long blocks, wheels, and hydraulic components.

Jerry Baer assisted in all phases of construction.

Editor: The RP-4 is the brainchild of David Rose who owns,  designed, and will fly this aircraft. Barnstormers eFLYER will  provide video of the first flight. Submit Your Comments.


That is real old news Bulent. Here are some pictures I took at
their hangar in San Diego in May 2004.

-- 
Paul Lamar ...No rotor no motor.

The Rotary Engine NewsLetter. Powered by Linux.
ACRE NL web site. http://www.rotaryeng.net
Copyright 1998-2006 All world wide rights reserved.