There is near zero load on the tube and it never gets over 200 F
if that.
We are not talking about stressing the part to 65,000 psi.
It will be lucky to see 600 psi.
Paul Lamar ...No rotor no motor.
Paul,
further to my post in the past hour; how did Mazda install the Pport in
the LeMans engine?
BR, Dave McC
I suspect they were sand cast p-port rotor housings the same as Mazda sold
and still sells for racing use. The two housings on the left in
this picture are Mazda sand cast p-port rotor housings.
Expensive.
Paul Lamar ...No rotor no motor.
The Rotary Engine NewsLetter. Powered by Linux.
ACRE NL web site.
http://www.rotaryeng.net
Copyright 1998-2006 All world wide rights reserved.