Subject: carburated a la early Tracy
From: Rotary Engine
Date: 6/15/2007, 7:58 PM
To: AARotary Engine


Paul:

My 1988 13B will be carburated a la early Tracy and pre 85 dual point
distribuitor. At first anyhow. Further down the road I may be encouraged
to
go with the more sophisticated wizardry.

Michael Silvius
Scarborough, Maine
Falconar F12
photos at:
http://rides.webshots.com/album/147451245dhnmgI

Put some 25 inch pipes on those carbs and it will work better than
Tracy's early system. Assuming that is you have a 2.85:1 PSRU.
If a 2.17:1 PSRU use 28 inches.
-- 
Paul Lamar ...No rotor no motor.

=============================================================

Paul:

Well that is good news. I have been trying to sort out the idea of a gravity
fed system (from the nose tank) in the interest of simplicity. And 28 inch
intake runners would actually allow that. I am envisioning runners that
instead of wrapping over the block would snake down either just over or
under the lower pipe on the water pump. This would allow me to install the
carbs low on the firewall.
I have not purchased the redrive yet but would not mind the older 2.17:1   I
dont need gobs of power, 150 is more than plenty for the Falconar. So if
anybody out there has a 2.17:1 and wants to upgrade to the newer 6 pinion
unit I may be interested.
Michael Silvius

Scarborough, Maine

You can keep the carb where they are and just add the long "stacks" with trumpet
mouths.

Paul Lamar ...No rotor no motor.

The Rotary Engine NewsLetter. Powered by Linux.
ACRE NL web site. http://www.rotaryeng.net
Copyright 1998-2006 All world wide rights reserved.