Subject: Subscribe to newsletter
From: Rotary Engine
Date: 6/19/2007, 6:30 AM
To: AARotary Engine


Hello Mr. Lamar,

My name is Rob Woods, I am 30 years old and I am a recent Mechanical
Engineering B.S. graduate from the University @ Buffalo. I have been the
head engineer for 3 Mini Baja cars and one Formula SAE car during my
time at school and have designed a majority of these vehicles by myself.
I have found a real passion for vehicle systems integration. I feel that
anyone can build a vehicle but it takes clever individuals to do it
right ala Colin Chapman, Gordon Murry, etc. I realize production based
machinery is put together with what is in the parts bin to keep costs
down which leaves people like me shrugging shoulders when a really
clever/ingenious part or assembly is attached to a rather boorish design.

During my time at school I have designed most of my parts completely
custom. Throttle bodies, manifolds, uprights, suspension pieces, brake
systems, etc. I also worked for Stainless Steel Brakes Corporation
designing a successful line of calipers for the aftermarket. In short I
am capable of doing just about anything I set my mind to. Basically what
the degree has taught me along with years of actual design work.

I have a chassis concept that I am looking to build around an engine and
transmission to achieve my aforementioned goals of integration purity in
a performance vehicle. I also plan to campaign it in the SCCA A-Mod
class so I have a cheap local testing ground for lower speed dynamics
and eventually to track days at major race tracks for the upper end. My
end goal is a street legal kit style car that I can drive that actually
has DAQ to backup/improve the design. If I can sell a couple later on
then all the better.

I had my eyes set of doing a different engine/ tranny combo but have
been intrigued with an r26b engine ever since I spent 2 hours staring at
it in the Detroit auto show about 6 years ago. While always impressed
with wankle engines, I have always seen their problems as something not
worth dealing with. That is until recently. I am impressed with the work
on the new Renesis engine and started to do a lot of research on them in
the past month.

I managed to finally stumble on your website and I have to say I am
blown away at the level of detail you seem to hold your work to. Your
thoughts on regenerative turbo systems using a Rotrex style traction
drive along with the cleverly simple slide throttle has had me smiling
for weeks. I spent the time to read every post that you have along with
doing a little background research with your involvement with racing
cars. It is really refreshing to see that someone is challenging ideas
on accepted technologies with actual researched and fabricated ideas and
not just armchair quarterbacking.

I was hoping to strike a conversation with you about my idea of 4 rotor
engine and tranny combination. I have some very specific question
regarding the setup of such an engine in terms of the cooling and oil.
If you are willing to speak/e-mail me about this then I will make a
couple drawings and descriptions to show you what I am up to.

The main reason for me to contact you out of the number of individuals
that I have found in my research is the perceived free thinking nature
you have toward your work and your knowledge base. I find it refreshing
to find someone out there that has an attitude toward asking the real
questions in design and development to be right up my alley. I request
that you add me to your news letter and I would hope that you would
consider taking a couple moments to see what I have cooked up. I also do
have some skills to trade for any time spent looking at my project.

Respectfully,

Rob Woods

Thanks for the complements Rob. Fire away on the questions.
Here are some pictures of the Mazda four rotor that won Lemans
back in 1991 when it was a REAL car race :)
-- 
Paul Lamar ...No rotor no motor.

The Rotary Engine NewsLetter. Powered by Linux.
ACRE NL web site. http://www.rotaryeng.net
Copyright 1998-2006 All world wide rights reserved.