Subject: New bell housing]
From: Rotary Engine
Date: 6/20/2007, 1:55 PM
To: AARotary Engine


Larry Childs has agreed to produce a new bell housing at reasonable
cost in his NC machine shop if there is a demand. It can be retro fitted  to most
existing aircraft for a more professional look. It is based on Al Gietzen's
brilliant idea of mounting the starter using the Mazda stock bolt positions
on the cool side of the engine. Last jpg.
Weight will be low as Larry can take weight out in the final
NC machining step. Jarrett Johnson did the Solid Works design.

This greatly simplified the bell housing design and lowered the cost.
We have been trying to get this done for the last 8 years or so.
Finally looks like it is going to happen. If you order a new gear box
from Tracy ask about deleting the adapter plate, spacers and long 10 mm
bolts. Use this bell housing instead. I am sure Larry would be
glad to wholesale them to Tracy if Tracy wanted them.

Larry needs to know how many would be interested. If you want one
please let us know.

If Tracy trusts it enough to source it, I'll buy it from Tracy when I
pick up the PSRU.  Tracy is a practical [electronic] engineer.

Larry Childs needs to talk to Tracy and get him to package it with the
PSRU - that would go a long way towards getting everyone to accept his
bellhousing without the typical wait-n-see approach.

Just my opinion.  (And my suggestion.)

-- 
Vince Orton

Good luck :)

Paul Lamar

The Rotary Engine NewsLetter. Powered by Linux.
ACRE NL web site. http://www.rotaryeng.net
Copyright 1998-2006 All world wide rights reserved.