Subject: Mazda fuel low level warning probe
From: Rotary Engine
Date: 6/21/2007, 10:08 AM
To: AARotary Engine


> Scott wrote:
> > If you want to do it really simple, just embed a thin plexiglass
> tube> inside the wall of the tank, with a floating magnet inside,
> and epoxy a
> > $0.50 magnetic reed switch on the outside. When the magnet
> floats down
> > to a target position, the switch is closed. Another $1.00 for a
> > blinking LED gets you the warning light.
>
>
> Plexiglass in a gas tank? Not a good idea! How about brass or
> aluminum.
> Fred O.

Sorry, you are right:  I should have said "glass".  Any plastic in a
fuel tank needs to be gas-resistant, which plexiglass is not.  The tube
could also reside outside the tank, as in a sight gauge.

However, if you can get a good GEMS sensor at eBay prices (instead of
retail $100-200), this would be a lot easier than building your own.

Scott Gettings


The Rotary Engine NewsLetter. Powered by Linux.
ACRE NL web site. http://www.rotaryeng.net
Copyright 1998-2006 All world wide rights reserved.