> > Larry needs to know how many would be interested. If you
    want one
         > please
         > > let us know.
         > > --
         > > Paul Lamar ...No rotor no motor.
         >
         > Paul,
         > Add me to the bell housing list.
         >
         > Graydon Woods
         >
         > OK.
         >
         > BTW here is what it looks like with a lot of inspection holes.
         > These can be cut later with hole saws or Larry can do it on
         > custom order. I saw a Ross that looked like this but I can't
         > find the picture so far. It is some where in this computer
         > with 200,000 files :)
         >
         > Paul Lamar ...No rotor no motor.
         >
         >
         > Yes, I will settle for the one with the holes cut.
         >
         > - -
         > Erik Snyman
         > Messina
         > South Africa.


    Any idea what the cost is going to be if you get a reasonable number of
    "takers", or did I miss that thread?
    Tom Pitt...

    Hopefully we will know in a few weeks.

    Paul Lamar ...No rotor no motor.

Paul,
What is the clocking on the starter location?  Six o'clock position
won't work for me.  If I can get it located at the 9 o'clock position,
then I would be interested.

Mark St.

It is clocked at 9 O'clock looking at it from the front.
Same as you have it now. Here is a picture I took when
I was there. I think you and Al are using the same starter
mounting idea.