> > Larry needs to know how many would be interested. If you
        want one
             > please
             > > let us know.
             > > --
             > > Paul Lamar ...No rotor no motor.
             >
             > Paul,
             > Add me to the bell housing list.
             >
             > Graydon Woods
             >
             > OK.
             >
             > BTW here is what it looks like with a lot of inspection
    holes.
             > These can be cut later with hole saws or Larry can do it on
             > custom order. I saw a Ross that looked like this but I can't
             > find the picture so far. It is some where in this computer
             > with 200,000 files :)
             >
             > Paul Lamar ...No rotor no motor.
             >
             >
             > Yes, I will settle for the one with the holes cut.
             >
             > - -
             > Erik Snyman
             > Messina
             > South Africa.


        Any idea what the cost is going to be if you get a reasonable
    number of
        "takers", or did I miss that thread?
        Tom Pitt...

        Hopefully we will know in a few weeks.

        Paul Lamar ...No rotor no motor.

    Paul,
    What is the clocking on the starter location?  Six o'clock position
    won't work for me.  If I can get it located at the 9 o'clock position,
    then I would be interested.

    Mark St.

    It is clocked at 9 O'clock looking at it from the front.
    Same as you have it now. Here is a picture I took when
    I was there. I think you and Al are using the same starter
    mounting idea.

    --
    Paul Lamar ...No rotor no motor.


Yes, I copied that idea from someone, probably Al.  Notice too that my
redrive plate picks up the extra mounting hole.

Mark St.

Nice work Mark.

Paul Lamar

The Rotary Engine NewsLetter. Powered by Linux.
ACRE NL web site. http://www.rotaryeng.net
Copyright 1998-2006 All world wide rights reserved.