> Is the rear counterweight need to be changed when
you
> switch from manual stick flywheel to automatic
flex
> plate??  Karibian
> > Yes. But it must be from the right year.
> -- > Paul Lamar ...No rotor no motor.


Paul

Are all the bolt hole patterns on the counterweights
the same in the 13B
series?


Doug Fir

I think so. Not sure however.

Paul Lamar ...No rotor no motor.

The 13B flex plate for the Renesis engine, per Tracy
Crook, has the same bolt pattern but he/she didn't say
anything about changing the internal one. Karibian

No need to change the counter weight on the RX8 motor.
Just the flex plate.

Paul Lamar ...No rotor no motor.

The Rotary Engine NewsLetter. Powered by Linux.
ACRE NL web site. http://www.rotaryeng.net
Copyright 1998-2006 All world wide rights reserved.