> > Ebay
> > > > http://tinyurl.com/2m6mf7
> > > > Buly
> > > > Thanks for the heads up Buly.
> > Is the firewall mount a good way to put it an aircraft?
> > Doc Custer
> Retired Software Engineer and sometime Audiologist


Hey Guys,

I used the ls1 coils on a race car project. Look on page 72 and 73
for
dimensional info on the coils which are accurate. They also have
built
in ignitors. Motec quotes them at 70 mJ. Beware of the funky coil
ends
as you need special ones, that are cheap, to engage the pin in the
coil.
Just throwing info out in case anyone didnt already know about them.

Rob

The pdf file is too large to publish.

Paul Lamar

Paul,

Sorry about that. Click on this link to get to the spot.

http://www.motec.com/support.htm

Click on the upper most link called "Wiring Diagrams and Drawings"
This will be a zipped file that is downloadable. It is full of drawings
and tech info for all sorts of OEM stuff that anyone here might be able
to use including the coils.

Rob


The Rotary Engine NewsLetter. Powered by Linux.
ACRE NL web site. http://www.rotaryeng.net
Copyright 1998-2006 All world wide rights reserved.