Subject: New front cover - Question for Larry Childs
From: Rotary Engine
Date: 7/2/2007, 4:06 PM
To: AARotary Engine


Larry,
After reading that you are planning to build some specific rotary
engine parts including a new front cover I was wondering if you have
considered building this new front cover to also be an engine
mounting plate for the conical style engine mount?   Mistral
(http://www.mistral-engines.com/index_files/Page710.htm) is building ta
similar part for the dynafocal mounts but I understand that it is very
expensive (but i don't remember how much- anyone?).

Ken Powell


Paul, Ken


Perhaps this is a good time to reveal or lay to rest my concerns about
mounting a rotary engine from one end.  No doubt a front housing can be
designed to be strong enough to support the total weight and bending moments
the engine, PSRU and prop places on it but IMHO this housing is not the
rotary engine's Achilles heel. This is afterall an engine that is sandwich
bolted together with LONG bolts known to stretch a bit in normal operations.

Lycs. and Contis. split the engine cases along the axis which is inherently
stronger but more so the engines were designed to be supported from one end
from the get go.   I've procrastinated long enough on this point believe
me:).  I am modifying the engine mount frame to be able to bed mount the
rotary engine.  I could be totally wrong on this but at least I'll sleep
better at night.


Regards


Doug Fir

I totally agree. Mazda and God did not intend this.
The prop torque is 2.85 times the engine torque. About 600 foot pounds
for a p-port. The engine must pass this torque all the way back to the Lycoming
dynafocal mounts. Not to mention the shear and bending forces in a 6 G encounter.

In the case of a schertz beam mount this torque goes only through
the bell housing.

Mazda beefed up the four rotor with carbon fiber plates top and
bottom when they used it as part of the chassis in a race car.

In the case of Mistral since they are building their own housings
they can design or redesign them accordingly.

Good call Doug.

Paul Lamar ...No rotor no motor.

The Rotary Engine NewsLetter. Powered by Linux.
ACRE NL web site. http://www.rotaryeng.net
Copyright 1998-2006 All world wide rights reserved.