Subject: Response to your Inquiry - Binsfeld Engineering Inc.]
From: Rotary Engine
Date: 7/2/2007, 5:50 PM
To: AARotary Engine


Paul

WOW

Incredibly expensive.   Inductive coil pick-up or Why Fi transmitter.  One
of our guys should be able to whip up something easier.


Doug

----------
From: "Bob Holden" <bob@binsfeld.com>
Date: Mon, 2 Jul 2007 10:16:42 -0400
To: "'Fir, Douglas'"
Subject: Response to your Inquiry - Binsfeld Engineering Inc.



Dear Douglas,



Thank you for your recent inquiry.  You mentioned you are interested in the
TorqueTrak Revolution instrument for permanent installation and continuous
monitoring.  Is this correct?  Shown below is some basic information about
both TorqueTrak instruments.  The TorqueTrak 9000 is for temporary test
measurements.



What is the shaft diameter?  I will check the associated microstrain for 220
ft-lbs to see what the torque signal will be like.

Torque Strain  <http://www.binsfeld.com/calculators/torque_strain.php>
Calculator



Telemetry Instruments from Binsfeld Engineering Inc. are commonly used to
measure true mechanical Torque and/or Power on a rotating drive shaft, where
it's impossible to hardwire a sensor.  The torque/power data is transmitted
by wireless, noncontact communication from the rotating shaft to a nearby
stationary receiver unit where the data can be processed.  We offer two
basic systems, one for temporary "test" measurements and another for
continuous monitoring.

__________________________________________________________________



1. For Temporary "Test" Measurements -



TorqueTrak 9000 Telemetry Instrument. Links:

TT9000
<blocked::http://www.binsfeld.com/index.php/products/torquetrak_9000/>
Torque Telemetry System
TorqueTrak 9000 -  <blocked::http://www.binsfeld.com/client/pdf/TT9000.pdf>
Users Manual
TorqueTrak
<blocked::http://www.binsfeld.com/index.php/products/torquetrak_9000_specs/>
9000 - Specifications
TorqueTrak
<blocked::http://www.binsfeld.com/client/pdf/TT9000_specs_rev.b.pdf> 9000 -
Printable Specifications
TorqueTrak  <blocked::http://www.binsfeld.com/calculators/tt9000_range.php>
9000 - Torque Range Calculator



Fast & Easy Torque or Strain Measurements.

Portable. Fits any size shaft, any torque level.  (Great for field work!)

Battery Powered RF Transmitter. (Data Transmission Distance ~ 20 feet.)

Price: $3,050.00 per system.

Delivery Leadtime: 2 weeks or less.

__________________________________________________________________



2. For Permanent Installation, Continuous Monitoring & Control -



TorqueTrak Revolution Instrument. Links:

TorqueTrak
<blocked::http://www.binsfeld.com/index.php/products/torquetrak_revolution/>
Revolution Torque and Power Monitoring System
TorqueTrak  <blocked::http://www.binsfeld.com/client/pdf/TTRevolution.pdf>
Revolution - Users Manual

TorqueTrak
<blocked::http://www.binsfeld.com/index.php/products/torquetrak_revolution_s
pecs/> Revolution - Specifications
TorqueTrak
<blocked::http://www.binsfeld.com/client/pdf/TTRevolution_specs.pdf>
Revolution - Printable Specifications

TorqueTrak  <blocked::http://www.binsfeld.com/calculators/ttrevo_range.php>
Revolution - Torque Range Calculator



Continuous Output Data: Torque, Power, RPM and Shaft Direction.

Customized/machined to fit a particular shaft diameter.

Inductive Power & Inductive Data Transfer. (No batteries.  No wear
surfaces.)

Price: $5,100.00 per system. (Up to 16"/406mm shaft diameter.)

Price premium will apply for larger shaft diameters.

Delivery Leadtime: 6 weeks or less.



Four independent output signals are standard:

1. Torque: 12 +/- 8mA, scalable.

2. Power: 12 +/- 8mA, scalable.

3. Shaft Speed/RPM: Frequency-based pulse indicator, mA.

4. Shaft Direction: Binary indicator, mA.

__________________________________________________________________



Both systems feature sophisticated 14-bit signal processing for a very
accurate and reliable data signal.  Both systems mount externally to the
shaft, so shaft modification and machine disassembly are not required.
Calibration can be done off-the-shaft.  I will be happy to provide all the
details.  Typically, the sensor input to either system is a full-bridge
(torque) strain gage bonded to the shaft.



Normally, our telemetry equipment is used to measure and transmit torque
data on a rotating drive shaft, but the equipment is not limited to this
application.  You can transmit data for any property that can be sensed with
a full-bridge sensor (or a "simulated" full bridge.)  This includes Strain -
Torque, Bending, Tension and Compression - even Pressure, Temperature and
Acceleration.  I can help you select the sensors & accessories for the
various applications.



I hope you decide to give the TorqueTrak 9000 or the TorqueTrak Revolution
system a try.  I am confident you will be delighted with the performance.  I
will mail some product literature to you.  I can help with your application,
if you like.  Please feel free to contact me anytime for assistance.  Thanks
again.



Best Regards,

Bob Holden, Sales Manager



Binsfeld Engineering Inc.

4571 West MacFarlane Road

Maple City, MI  49664  USA



P:  231-334-4383

F:  231-334-4903

E:  bob@binsfeld.com

W:  http://www.binsfeld.com





 _____


The Rotary Engine NewsLetter. Powered by Linux.
ACRE NL web site. http://www.rotaryeng.net
Copyright 1998-2006 All world wide rights reserved.