Paul,

Weight back down to 8lbs and stress has a more even distribution around
the bell. The depth of the outer flange is .5” to center the drive.

I think this is the rev we will build to.

Larry

Larry changed the scale so the stresses are much much lower.
That is why it is out of the blue again.
Weight was added around the PSRU to stiffen the bell and pilot
the psru but was removed by using a larger radius in the bell.
The overall stress distribution is now more uniform.

I can hardly wait to get the castings.

Paul Lamar ...No rotor no motor.

The Rotary Engine NewsLetter. Powered by Linux.
ACRE NL web site. http://www.rotaryeng.net
Copyright 1998-2006 All world wide rights reserved.