Subject: Heet on da feet
From: Rotary Engine
Date: 7/11/2007, 10:09 PM
To: AARotary Engine


Hummm, Good idea Dan -

We have a firewall to protect us from the engine if things get too hot.
It always bothered me to cut a big hole in it to route air from the
_hottest_ item exposed in the plane....  so, we all have oil coolers, if
as Dan says, the only change is to use longer oil cooler lines and mount
it in an insulated air-box in the cabin, with a flipper door so it
ALWAYS gets full outside air but dumps it into the cabin or overboard -
or some mix, how it that more risky or complicated? The air-box is used
on most cars for years.... Sounds simpler than the toaster to me :-)

Dave

I've done just that.  There's a door midway down the oil cooler.  I
close the door, trapping air and forcing it into the cabin.  Open the
door and the lowest pressure is straight back, so that no air enters the
cabin from that direction.  I hope to be able to test it this winter
(God willing, and the creek don't rise).

Ernest Christley


The Rotary Engine NewsLetter. Powered by Linux.
ACRE NL web site. http://www.rotaryeng.net
Copyright 1998-2006 All world wide rights reserved.