Hi Jerry,
Have you investigated the pullies on the big, belt drive Harley
motorcycles?
They certainly deal with power in the range you need, but I don't
know what
material the large pulley is made from----could be heavy steel, but
it looks
to be about 10" dia. Just a thought. Dave M
Dave, can you give me a bike model name so that I can do a parts
search? I doubt that any Harley has turned 7000 rpm but, maybe, with
a smaller drive sprocket, it could be made to work. Jerry
I would suggest a trip to the nearest Harley dealer. There are number
of options and sizes, some are aluminum or even titanium. Tell the guy
what you are trying to do and he may come up with everything you need
off the shelf.
As far as speeds, that's not as big an issue as you think -- you aren't
going to put anywhere near the load on this as the normal application,
which is to push a 900-lb motorcycle and 250-lb rider from 0 to YEOW in
10 seconds . . .
Keith Wood
Come on guys sign your message or I am not going to publish them.
Paul Lamar ...No rotor no motor.
The Rotary Engine NewsLetter. Powered by Linux.
ACRE NL web site.
http://www.rotaryeng.net
Copyright 1998-2006 All world wide rights reserved.