> Larry sent me a .avi movie but it is too big to publish at 2.6 meg.
> Here is a shot I took of the movie LCD screen with my camera.
> I did not know how to copy a snap shot of a movie.
> The prnt screen key does not seem to work.
> You can paste it into MS Paint and see it there but when you save it as
> a jpg the jpg is blank. Anybody know how to do this?
>
> We should have this in the foundry by Friday.
Hi Paul,
Try Keno. It's a fairly straightforward movie editor for Linux. You
can save a still frame from the File menu.
Bob W.
Thanks Bob. BTW where do I get a decoder for Linux for avi. I have
Fedora 4 and it did not come with decoders. Something about software
patents or some such.
--
Paul Lamar ...No rotor no motor.
Take a look at
http://www1.mplayerhq.hu/MPlayer/releases/codecs/
Getting the codecs to work correctly has always been a little tricky
for me. Most recently I'm using Ubuntu with the Synaptic package
manager for all the basic software updates and Automatix for packages
not supported by Debian. They seem to get everything in the right
places for my installation.
Bob W.
--
N93BD - Rotary Powered BD-4 -
http://www.bob-white.com
3.8 Hours Total Time and holding
Cables for your rotary installation -
http://www.roblinphoto.com/shop/
Yes Ubuntu is getting a good reputation. Rumor has that Dell is now
offering Ubuntu pre-installed on their notebook computers.
I'll have to get a copy and try it.
--
Paul Lamar ...No rotor no motor.
The Rotary Engine NewsLetter. Powered by Linux.
ACRE NL web site.
http://www.rotaryeng.net
Copyright 1998-2006 All world wide rights reserved.