Very thrust off set

37.5 inches is the length at present. However, Dale still is
reserving the right to change it if he can get his hands on a stock
cowl to measure. I made a mistake in the info I sent. The
conversion should have been 1.166 degrees. I wrote 1.66, about half
a degree to much. The corrected number I get is .763 off set from
center. new drawing attached Jerry

The right thrust angle for the RV7A is 1�10'. I converted this to
1.66 degrees. Then drew it out and measured the off set at the
firewall (37.5 inches) to be .842 inches. Is this correct?

What is the firewall to prop distance?

Paul Lamar ...No rotor no motor.