One question which is bothering me concerning pressure in my fuel
system. The distance between the inline fuel pump and the throttle body
where the pressure regulator is located is about 16 feet. The pressure
sender is located about 6 feet before the pressure regulator. The fuel
lines are 3/8 inch inside diameter throughout. The fuel is gravity fed
about 11or 12 inches to the fuel pump which pushes it  to the fuel
regulator and throttle body, activating the pressure sender on the way..
Is the fuel pressure the same at the pump outlet, the sender and the
regulator? Yvon.

Within a fraction of a psi between the pump and the fuel pressure
regulator. Is there a return line from the fuel pressure regulator?.
Sounds like the sender is measuring pump pressure and not injector pressure.

Paul Lamar ...No rotor no motor.

Yes Paul, forgot to mention that, The return line is from the regulator
direct to the top of the fuel tank. Yvon.


The Rotary Engine NewsLetter. Powered by Linux.
ACRE NL web site. http://www.rotaryeng.net
Copyright 1998-2006 All world wide rights reserved.