-------- Original Message --------
Subject: TES O-rings
Date: Mon, 16 Jul 2007 09:12:05 -0700
From: Rotary Engine <rotaryeng@earthlink.net>
To: AARotary Engine <rotaryeng@earthlink.net>



Responding to every bit of mis-information on the web is an impossible task.
If anyone wants to know what I am using, just ask.

snips....

Tracy Crook

snips....

What is the section diameter of the inner TES O ring you are using?

Paul Lamar

So much for:
"Responding to every bit of mis-information on the web is an impossible task.
If anyone wants to know what I am using, just ask."

I think Tracy is using .098" in section diameter which is too large.