Larry delivered the pattern by driving down from Northern California
Thursday after noon. We drove it over to the foundry today and
it passed inspection and left it there.

In fact they complemented Larry on the nice work. I am relived and
very happy.

We will have ten castings next week. Larry is building a
test rig so they will be static tested to 600 foot pounds. The same torque
will bend the flange on a Lycoming aerobatic motor so any more than
600 foot pounds does not make any sense.

Paul Lamar ...No rotor no motor.

The Rotary Engine NewsLetter. Powered by Linux.
ACRE NL web site. http://www.rotaryeng.net
Copyright 1998-2006 All world wide rights reserved.