But George,
We are local.... it's just a little pond with some rocks in the middle!
Larry

Larry,
What do I say to that!- thank the Lord for the Internet.
Your lucky your not within 50 miles of me - I would be in your shop every
other day.
Some people just don't have the passion for doing the things were interested
in - sad but true!
Do me a favour Larry check the strength around the mount holes, I thought
some small stiffeners ( like the Mazda BH) would add strength and assist
flow to the sides. The face is plenty strong enough IMHO.

BTW you could do an over size pattern and cast one as the 'final sized
pattern', if you didn't want to machine out of solid expensive material.
I just feel timber will move in any thickness you make it out of, if only
slightly.
George (down under)


The Rotary Engine NewsLetter. Powered by Linux.
ACRE NL web site. http://www.rotaryeng.net
Copyright 1998-2006 All world wide rights reserved.