I am pleased to announce that we are taking orders for the Continental O-200
propeller. In fact we will be running a special for a few months to get this
new program started. More about that later.

A few facts about the new propeller system:

Two bladed ground adjustable propeller. 100% composite material blades with
a metal leading edge and aluminum hub.

Initial diameter will be 70 to 72 inches. We expect to also release a 67 to
69 inch diameter and a 74 to 76 inch diameter before the end of the year.

We will be using a Patent Pending "cartridge" system that will establish
your pitch without the use of a protractor. You can change the pitch of this
propeller in the time that it takes you to loosen 6 bolts, change the
cartridge (less then a minute) and retorque the 6 bolts.

As I stated above, we are running an introductory special for a few months.
The propeller, the mounting hardware, and one extra cartridge will cost
$2556.00 for the Continental O-200-A or the Lycoming O-235-L2C and $2676.00
for the Continental O-200-D or IO-240.


Ed  ez@sensenich.com.



The Rotary Engine NewsLetter. Powered by Linux.
ACRE NL web site. http://www.rotaryeng.net
Copyright 1998-2006 All world wide rights reserved.