Subject: RX 7 Flexplate & counterweight for sale
From: Rotary Engine
Date: 7/31/2007, 8:53 AM
To: AARotary Engine


Hang on to the flex plate. You will need that for the RX8 engine as the RX8
flex plate does not work.

-- 
Paul Lamar ...No rotor no motor.


Hi Paul,
I already saved two flex plates for the RX8 !
I heard that is some problems with the Renesis Apex seals ??  I am also
waiting for the new Bell Housing any idea about the price ??
I was thinking about using the Marcotte PSRU with governor on my Renesis ,
do you have any advice or know someone who use it ??
Thanks for letting me know,
J-M

No problem with the RX8 engine apex seals as far as I know.
They have been running them up to 9000 RPM for many many Star Mazda
series races. There are about 50 cars or more in this series
and they use stock RX8 engines. Races are every week or two apart
all summer long.

Don't believe all the rumors. There are people
out there that will say anything to sell you their cheap steel apex seals.
Every piston engine maker in the world knows that cast iron is the
best material for piston rings as well as apex seals.
Other than ceramic of course. It is a well known fact that steel
apex seals tear up rotor housings in rather short order.
If you are drag racing it is probably no problem as the engines
only last a couple of hours and then they are torn down.

Mazda has spent millions on R&D and have built two million engines.
Taken car of they will last 300,000 miles or more.

Yes of course the three piece seals had problems with turbo engines
but Mazda was driven by smog and MPG to use the three piece
seals in the 3rd gen engines. They are now back to the two piece
for all engines.

I am amazed at the arrogance and ignorance of some people that think they can
make a better apex seals than Mazda.

Read my article on the subject.
http://www.rotaryeng.net/history.html

The price on the bell housing will be reasonable but we don't know
what it is until Larry machines one. I am on my way to the foundry today
to take some pictures as they come out of the sand.

The Marcotte PSRU is not bad but it is heavier than a well designed planetary.
There are people out there using it but I don't know their email address
or name. Hang on a bit. There maybe another planetary PSRU available soon.
The Ross was great in its heyday but unfortunately the engineer died.

Paul Lamar ...No rotor no motor.

The Rotary Engine NewsLetter. Powered by Linux.
ACRE NL web site. http://www.rotaryeng.net
Copyright 1998-2006 All world wide rights reserved.