Subject: Flexplate & counterweight for sale
From: Rotary Engine
Date: 8/1/2007, 12:34 PM
To: AARotary Engine


> also on the SS exhaust flange, how thick is it?
>
> I could not find details of it on the Atkins site. I have  Racing Beat
1/2
> thick iron version but it is mighty heavy and would like something
> thinner.
> I also how large are the bores for the pipes? I have some 1&7/8 (od) SS
> (.055 thou thick) bends I plan on using so the bore size of the flange
may
> be an issue.
>
> Michael Silvius
> Falconar F12
> http://rides.webshots.com/album/147451245dhnmgI


Hi  Michael ,
Sorry, I just sold the Flex plate & counterweight.
The flange is 3/8 thick & the bore size is 2" 1/8.

J-M


yes, I am aiming for about 1/4 inch thick on mine and the bores on the one
you have are to big for my pipes.
the RB one I have is also 2&1/8th bores so no good for me either.

michael silvius


The Rotary Engine NewsLetter. Powered by Linux.
ACRE NL web site. http://www.rotaryeng.net
Copyright 1998-2006 All world wide rights reserved.