I don't understand the Kinsler nozzle flow chart "at zero pressure".
Take the first line. An orifice of .016 is going to flow 16.5 lbs per
hour. If the orifice is in the bottom of a container you still have
pressure from the weight of the fuel above it. In other words, no
pressure, no flow. Would somebody please explain? Karibian

Down load this catalog. Perhaps it is a mistake.

http://www.kinsler.com/catalog.htm

How is your fuel injection system coming?

Paul Lamar ...No rotor no motor.

The Rotary Engine NewsLetter. Powered by Linux.
ACRE NL web site. http://www.rotaryeng.net
Copyright 1998-2006 All world wide rights reserved.