I bought them on Ebay thinking I would use them for the cooling system. At
the time people were talking about one inch hoses and they are about the
right size for the water pump inlet and outlet.

karibian

I would like to state for the record that one inch hose is too small
for cooling a rotary properly. If it were the engineers at Mazda
would have used it as all auto companies try to save a nickel.

Please stick with the stock hose sizes.

Paul Lamar ...No rotor no motor.

The Rotary Engine NewsLetter. Powered by Linux.
ACRE NL web site. http://www.rotaryeng.net
Copyright 1998-2006 All world wide rights reserved.