Hi Paul,

What injectors would you recommend?

Planning for a 1986 13B @ 7200rpm using EC2 and RD1C.

The stock injectors are 460cc/min. low impedance.

I guess I must stick to low impedance since high impedence
takes 2 msec. to turn on compare to .5 msec for low impedence injectors.
7200rpm is 120 cycles per sec which is 8.3 msec per cycle.
The injection window is probably about one third of this, so the
injectors must turn on and off quite fast.
Should I increase the injector capacity?
Should the Primary and Secondary injectors be the same?

Thanks,

JP


I would stick with the RX8 injectors. They are proven to work
with the high RPM. You should ask Tracy these questions as he is
the one that is determining  the pulse width.

Paul Lamar ...No rotor no motor.

The Rotary Engine NewsLetter. Powered by Linux.
ACRE NL web site. http://www.rotaryeng.net
Copyright 1998-2006 All world wide rights reserved.