Subject: Buly is Going Lyco (Too)?
From: Rotary Engine
Date: 9/15/2007, 8:11 PM
To: AARotary Engine



Hey Paul,

I heard a rumor that Buly is going to Lycoming..  Is that true??


Matt-

Yes. He could not deal with the EFI. I don't blame him.
For some one not trained in single chip microcomputer hardware
it is real tough to deal with. The vast majority of people have enough
trouble with just simple wiring like lights and starters.

You just can't see them electrons :)

Paul Lamar ...No rotor no motor.


I am one of those who found EFI intimidating but I always thought I
would deal with it when the time came.  However,  there is almost a
continuous thread of problems faced by other builders trying to get
reliable performance  out of the the electronic ignition and EFI
which of course I have been reading for years.  I can't exaggerate
the relief I felt the when I decided to go to crank fired ignition
and a carb.  It was a matter of accepting my own limitations.   Jerry


Furthermore one is expected to solder 37  tiny wires on this
connector. I would say 80% of the people on here don't have the eye sight,
skill and manual dexterity required  to do this let alone the electronic
knowledge
to trouble shoot such a system.


I suggested years ago a simple printed circuit board adapter and screw
type connectors but the idea was rejected out of hand.
-- 
Paul Lamar ...No rotor no motor.

I've been watching this discussion about fuel injection and I was wondering
why you couldn't just use an aircraft fuel injection system like the one
from Airflow Performance that is made for the 200hp Lycomings and just run
two injectors into each port.  It's a proven, mechanical, constant flow type
that works and is readily available.

Steve

That will work fine. the early Power Sport engines used it.
I am just trying to come up with something that is less costly.
-- 
Paul Lamar ...No rotor no motor.

The Rotary Engine NewsLetter. Powered by Linux.
ACRE NL web site. http://www.rotaryeng.net
Copyright 1998-2006 All world wide rights reserved.