Subject: Constant tension hose clamps.
From: Rotary Engine
Date: 9/16/2007, 7:30 AM
To: AARotary Engine


> This inter cooler hose blew off the Light Speed Nemesis Nxt
> causing it
> to drop out of the Sportsman race today while running second despite
> the hose barbs being properly beaded.
> The inter cooler is mounted on the cowl while engine moves
> around on its
> rubber mounts during G loading causing a strain on the hose. Not
> to mention
> the 60 inches of Hg boost it is running. I suggested Breeze
> constant tension
> hose clamps. The hose is held by the crew chief Ron Simard who
> happens to be on this
> newsletter. Ron told me he is thinking of replacing the Lycoming
> with a four rotor
> turbo for the 1000 cubic inch class. Larry Childs checked with
> the organizer
> and they said a four rotor was OK in the 1000 cubic inch class.
>
> BTW the current Nemesis Nxt's are pushing 400 MPH.
> --
> Paul Lamar ...No rotor no motor.

I would really like this to become a reality.  A Nemesis four rotor
turbo,  Paul what would be the hp on this engine.   600HP ?  And the
speed with this low drag design  awesome.  If money was no object this
would be my plane hummmmm.

Marc J
NexusMustang

I figure 300 HP per rotor ought to get the job done. Total 1200 HP.

Well (HP)^.3 = constant * MPH
    (650)^.3  = constant * 378 MPH
constant = 6.98/378

constant = .01846

Therefore (1200)^.3/.01846 = new top speed. = 450 roughly providing
transonic effects do not happen. There is another factor and that is the
number of G's pulled in the corners. The effect this has is to raise
the required lift coefficient. The new lift coeff. G's x (straight line
C sub L) required.

The induced drag is (C sub L)^2/Pi x (wing aspect ratio).

That is the main reason the Nemesis is going so fast. No other
type airplane in that class has a higher aspect ratio.

The racers are pulling 3 or more G's more or less continuously.

The job of the pilot is to fly straight lines between pylons
and then rack it around the pylon and then level the wings as
soon as possible to build the speed back up on the straights
as much as possible until the next pylon occurs. In effect
you are using the inertia of the aircraft to help get you around
the high drag pylon area.

Paul Lamar ...No rotor no motor.

The Rotary Engine NewsLetter. Powered by Linux.
ACRE NL web site. http://www.rotaryeng.net
Copyright 1998-2006 All world wide rights reserved.