If you used two air bags shaped like this mounted on a person's
shoulders and it was 24 feet in diameter the frontal area would
be 452 square feet. Given a drag factor of approximately one
and a person weight of 250 pounds the free fall speed would
be drag = V^2 x 452 x .0026 = 250 = man's weight.
V^2 = 250/ (452 x .0026) 'MPH
V= (250/(452 x .0026)^.5
V is roughly 15 MPH.
You don't need a parachute. The person will land upright as his
CG is below the center of the sphere.
AND it will be a HIGHLY cushioned impact.
Probably 24 feet diameter is over kill. Inflation is near
instantaneous with
two explosive charges.
I think NASA are already using these to cushion the impact of rovers
on the moon.
Paul Lamar
Some of the Mars probes used them for the final descent phase -
Sprit in 2004 -
http://space.about.com/cs/nasanews/a/spiritlandingst_2.htm
Beagle 2 in 2003?
http://www.space.com/missionlaunches/missions/beagle_lander_000522.html
-dave
If you get the bag pressure just right you can come to a complete
stop when your feed touch the ground.
The bag will be distorted by dynamic pressure as it is falling
but the max pressure is pretty low at about 2.34 pounds per square
foot at 30 MPH or .0163 psi.
--
Paul Lamar ...No rotor no motor.
The Rotary Engine NewsLetter. Powered by Linux.
ACRE NL web site.
http://www.rotaryeng.net
Copyright 1998-2006 All world wide rights reserved.
DEFDBL A-Z
TimInc = .02
Weight = 200 'Weight in pounds
Area = 55000 'square inches
psi = .0042
Force = Area * psi
Velocity = 30 'terminal velocity in per second
Distance = 12 'feet
CLS
'Force = Weight * Acc 'F = ma
Acc = (Force / Weight) * 32.2 'Acc in FPS/second
PRINT "Acc ="; USING "####.##"; Acc / 32.2; '
PRINT " G's";
PRINT " Bag Force ="; USING "######"; Force;
PRINT " Pounds";
PRINT
PRINT " Time Velocity FPS MPH Distance Ft."
FOR Time = 0 TO 3 STEP TimInc
Time = Time + TimInc
PRINT USING "####.###"; Time;
'Acc = VelInc / TimInc
VelInc = (Acc * TimInc) 'VelInc in INches per second
Velocity = Velocity - VelInc
IF Velocity < 0 THEN GOTO endit
PRINT USING " ####.##"; Velocity;
PRINT USING " ####.##"; (Velocity * 60) / 88;
DisInc = Velocity * TimInc 'DisInc in feet
Distance = Distance - DisInc
PRINT USING " ####.##"; Distance
NEXT Time
endit: