Paul,

Great pix from Reno, I hope you will post more.  I've been watching the discussion
on gears and I was wondering if anyone has used gears from
Lenco: http://www.lencoracing.com/
These are some of the strongest gearsets I've seen.  Another thing is that they
have straight cut--the teeth look very strong.

Rotary engines could definitely find a home in air racing.  A four-rotor has
got to cost less than what they're spending on those Lycoming and Continentals
if they can get the pieces from that bunch in Australia.

Steve Brazil

An 8 cyl Lycoming O-720 in the 1000 cubic inch class cost $110,000.
The crankshaft alone is $20,000 to $30,000.

Looks like Lenco have three widths of gears. 1/2, 3/4, 1, and 2 inch.
The stock Ford set is .9 inches wide.  The Lenco one inch ratios appear to be
reverse rotation with power taken from the ring gear.
Here is the one inch table.

Ratio-Planet-Sun-Ring
1.25:1 34... 23.. 91
1.28:1 32... 25.. 89
1.31:1 27... 25.. 80
1.34:1 24... 25.. 74
1.37:1 27... 31.. 83
1.41:1 24... 34.. 83
1.44:1 20... 32.. 73
1.44:1 22... 35.. 79 Stronger
1.46:1 22... 37.. 80
1.48:1 22... 40.. ??

Paul Lamar ...No rotor no motor.

The Rotary Engine NewsLetter. Powered by Linux.
ACRE NL web site. http://www.rotaryeng.net
Copyright 1998-2006 All world wide rights reserved.