I am going to use an all aluminum single rotor for my KR2S. Question is,
what is the minimum width / height for a rotary firewall without having
to go to extremes for to squeeze everything in ?

-dave


I thought it depended on the KR2 design. Two small people side by side requires
about 36 inches.  The height will be at least 18 inches for the engine. My guess
is 24 inches if you want an oil sump.
-- 
Paul Lamar ...No rotor no motor.

Dave,
Keep us single rotor fans posted on progress.
George ( down under)




The Rotary Engine NewsLetter. Powered by Linux.
ACRE NL web site. http://www.rotaryeng.net
Copyright 1998-2006 All world wide rights reserved.