In the mean time Reno air racers are adding rotary
engine features to their Continental piston engines.
the 3 pinion planetary failed when two of the six cylinders
misfired.
I don't know the source of the gears or the reduction ratio.
They did it to slow the prop as they were running the engine
in the mid 3000's and the prop tips were going transonic.
--
Paul Lamar ...No rotor no motor.
Paul,
I know this seems fairly obvious but at the speeds these guys are
starting to go the forward speed is a much bigger component than the
guys that were originally designing these props really expected! I'm
sure some of the teams have got custom designs. (I think the NXT
prop is
a special for the aircraft) I'm certain that some of the "regular guys"
(read not made of money) are pushing modified standard props waaaay
beyond the designers intention.
Bill Jepson
I agree with you on the props. They are free for the top guys.
Everybody and that includes Nemesis Nxt Jon Sharp are running
the direct drive A/C engines in the mid 3000 RPM range. That is how
they get 650 HP (for awhile) at 60 inches of Hg manifold pressure.
Anybody racing in this class near the front has a lot of money. I would
guess a millionaire at a minimum. Either that or a pretty good income
in the over $100,000 a year category. The engines must be overhauled
or replaced frequently. At a minimum they must be disassembled and
the parts magnafluxed once a year. In the case of Jon Sharp and maybe
a few other top people the engines are given to them by Continental
or Lycoming and a top engine engineer is provided at Reno to keep an
eye on them.
Paul Lamar
I think the Nemesis is running a Lycoming (correct me if I'm wrong)..
The factory support is the same however..
Matt-
Yes. Perhaps that should have been and/or. More like what I meant.
Paul Lamar ...No rotor no motor.
The Rotary Engine NewsLetter. Powered by Linux.
ACRE NL web site.
http://www.rotaryeng.net
Copyright 1998-2006 All world wide rights reserved.