Paul,

Do you have the weight and specs on the 20B?  What do you think the weight
would be with the aluminum end and intermediate plates?

Steve Brazil


The bare engine weight is 260 pounds. My guess is you could get about 20
pounds per housing of it if there were a 20 B aluminum intermediate housing
available. Unfortunately that is not the case. There is another way to
go however and that is use the Guru special 3 rotor shaft and main
bearing set up. In that case the stock 20B intermediate housing is replaced
by a 13B intermediate housing. Bottom line roughly 200 pounds.

-- 
Paul Lamar ...No rotor no motor.