Perry,
Thanks. Sound like you have a KISS system to me, and it is proven now.
What
is the highest altitude you have flown your bird? I will be going EFI as
well by choice but then again for various reasons I also don't have a
choice:) I really don't know what all the phobia is about. With a little
study anyone can master the basics of modifying the standard auto CPU.
For
safety sake pot the board, and use a back-up if desired.
If Megasquirt would work with a mass flow sensor than I would consider
that
route. I've given up on using Tracy's unit and it is for sale if anyone
needs one real cheap.
Doug Fir
-- Doug
I'm in the process of deciding on a Efi system at the moment for my Glasair
SII Renesis 4 port.
What has been the problem with Tracy's EFI?
Thanks
Steve
Perth Western Australia
Steve,
No problem at all. As I answered Dave today and perhaps Paul hasn't posted
it yet, my TEST engine project has gotten more complex then originally
thought. I have leaped frog testing a side port engine and went directly to
P-port engine with the C/S prop. In short I realize I need either access to
the source code or a least a close working relationship to get Tracy's
unit to perform like I need it to. Neither is likely at my location in
Japan. Case in point 1. injector firing timing and sequencing. 2. use of
alternative fuels, and finally a desire to use a mass airflow sensor and air
temp to calculate fuel charge.
Tracy's unit is fine for what it was designed for. The unit I bought from
him is still new, unused and in the box if you are interested
Regards
Doug F
Thanks Doug
When did you purchase it?
What engine coils etc is it configured for?
How much do you want for it?
Thanks
Steve
Perth WA
Steve and others. I think it would better to talk off of this forum in
respect for lightening Paul's work load.
Please contact me at fir@ gol.com
Thanks
Doug
No. I am interested too Doug. Fire away.
Hi Doug & Paul
I am interested, however, Paul if you are interested in the EC2 I feel you
should have first dibs on it.
Thanks
Steve
PERTH WA
Galsair Super II Renesis 4 port RD1-C
No I don't want to buy it. I am just interested in what Doug thinks
its worth. I have one of Tracy's early models.
I am also working on a mechanical fuel injection system.
--
Paul Lamar ...No rotor no motor.
The Rotary Engine NewsLetter. Powered by Linux.
ACRE NL web site.
http://www.rotaryeng.net
Copyright 1998-2006 All world wide rights reserved.