Subject: Seven Stock 2007 (w/ rotamax comment)
From: Rotary Engine
Date: 9/23/2007, 12:24 PM
To: AARotary Engine


Sneaked up on us this year. It is TOMORROW.
Is anybody going besides myself.

Paul Lamar ...No rotor no motor.



Paul,

What's this?  I'm planning to go to Flabob tomorrow--it's Chapter One Open
House.

Another subject--I just received my September Sport Aviation and there was
a
thing about Rotamax.  I've never heard of them but I checked their
website:
www.rotamax.net
There is a bunch of interesting stuff here.  Apparently, they're working
on
three and four rotor variants.  They are based in Ohio and the engines are
almost all aluminum.  I think they are the same displacement as the Mazda
and the website says that they use Mazda seals.  Have you checked these
guys
out?

Steve Brazil

It is the largest meeting of rotor heads in the world. Hundreds of cars
show up from all over the US with about 5000 people.
Google Seven Stock 2007 It is in Irvine at the Mazda distributor.
You will see all sorts of things up to 4 rotor engines.

Paul Lamar ...No rotor no motor.

It is a charge cooled, all aluminum engine which weighs less than half of
13B weight, according to ANN interview of Eric Barger, president of RotaMax
at oshkosh. And the reason it is going to work better is today's tighter
machining because of cnc machinery use. That part kinda got me; but, I am
willing to wait and see.
jofarr, soddy tn

Paul,

I made it to Seven Stock and I'm glad I did.  We had breakfast at Flabob and
went to Irvine from there; we arrived a little after noon.  We got soaked at
Flabob and got a another good soaking at Irvine.  It was so bad at Flabob
that the Air Force folded up their tent and went home; I told them they
should have invited the Navy.

They had an nice looking show car prototype there, I don't know if was an
actual running vehicle, but it looked like it was.  I don't care for the
goofy interiors and funny controls which usually go away when production
time comes.  Rumor was that this thing had a 1600cc twin rotor, which is
interesting.  This is probably a manufacturing decision that it's easier to
build a bigger two rotor than a three-rotor.  I didn't see any three-rotor
engines but I got a lot of questions answered.

At Flabob, they had an Allison 250 on display and I think it, the 300 to 350
horsepower versions anyway, could be replaced by a three-rotor fairly
easily.  I seem to recall the this engine has an output shaft speed of
around 5500 to 6000 rpm, but I'm going to dig around to find this out.

Steve Brazil


The Rotary Engine NewsLetter. Powered by Linux.
ACRE NL web site. http://www.rotaryeng.net
Copyright 1998-2006 All world wide rights reserved.