Subject: VIDEO CLIP OF A TAKE-OFF WITH MY ROTARY POWERED ZENITH 200
From: Rotary Engine
Date: 9/24/2007, 8:20 PM
To: AARotary Engine


A few days ago I made a video clip of a take off of  my aircraft, as
viewed from the right hand seat.
When viewing the video clip in Windows Media Player, the propeller is
turning counterclockwise at take off, once at pattern altitude and the
engine is increasing rpm, the propeller slowly begins to turn
clockwise...
Why is that?
Can I set my camera so that the propeller will not be visible?
It was fun nevertheless...
Yvon.





The video camera is probably at 15 frames per second or 30 fps.  Depending
on the RPM of the prop the camera will take a picture with the blade at a
slightly earlier time than before (appearing to move back).  I'm sure one of
the really smart guys on this list can derive an equation based upon the
ratio of the camera and propeller "frequencies" ;-)

-Alan


The Rotary Engine NewsLetter. Powered by Linux.
ACRE NL web site. http://www.rotaryeng.net
Copyright 1998-2006 All world wide rights reserved.