Subject: VIDEO CLIP OF A TAKE-OFF WITH MY ROTARY POWERED ZENITH 200
From: Rotary Engine
Date: 9/25/2007, 8:43 AM
To: AARotary Engine



    A few days ago I made a video clip of a take off of  my aircraft, as
    viewed from the right hand seat.
    When viewing the video clip in Windows Media Player, the propeller is
    turning counterclockwise at take off, once at pattern altitude and the
    engine is increasing rpm, the propeller slowly begins to turn
    clockwise...
    Why is that?
    Can I set my camera so that the propeller will not be visible?
    It was fun nevertheless...
    Yvon.

Do a google search on such words as "aliasing" and "Nyquist" for a good
explanation.

My answer is that the camera works by taking a series of essentially
still images of what's going on within its view.  Any action going on
will be frozen at the moment each still is taken.  The frequency of
taking (and playing back) the still images is fast enough to fool the
eye/brain into thinking it's seeing smooth motion in the images.

Now, imagine that the camera is pointed at a one bladed propeller - a
shaft with a blade mounted on it in an "L" configuration.   Imagine that
the shaft is rotating (clockwise for ex) at exactly the right speed such
that the blade is in the same relative position each time the camera
captures an image.  When played back the blade would appear not to
move.  If the speed of the shaft were adjusted slightly faster, the
blade would appear to move in the clockwise direction.  Each frame
(image) would capture the blade at a slightly advancing angle as
compared to the previous frame.  If the speed were just slightly slower,
the blade would appear to move in the counter clockwise direction - each
image would capture the blade located in a slightly earlier position in
rotation.

Look at old movies - you'll see this on wagon wheels.  You can see the
same effect on things like picket fences being filmed from a moving
vehicle..

Hope that helps a bit.


Regards,

Matt-


In the same context I saw once on 'you tube' a helicopter flying with
the rotor being stationary.
It looks quite weird.
It was nothing else but synchronized speed of the rotor blades and camera.
It sure could fool a lot of people which was the aim of the short movie
clip.

Rolf



The Rotary Engine NewsLetter. Powered by Linux.
ACRE NL web site. http://www.rotaryeng.net
Copyright 1998-2006 All world wide rights reserved.