Subject: Midget Mustang with P-Port 13B
From: Rotary Engine
Date: 9/26/2007, 7:59 AM
To: AARotary Engine



     > Hey Paul,
     >
     > I have seen a number of Midget Mustangs (the single seater)
    powered by
     > O-320's.  I just saw an MM powered by an O-360 with a C/S prop.  I'd
     > have to think it would be fairly reasonable to stuff a 13B into
    an MM.
     > Maybe even mount the radiator under/behind the pilot, just like the
     > P-51.  Could help the weight and balance.  I've also seen a couple of
     > MM's with retractable landing gear.  Such a combination should
    qualify
     > for Sport Class - enough have been built.  I'd like to have a
    structural
     > analysis for flutter.  It shouldn't be against class rules to put
    enough
     > more beef in the structure to make it go 400mph..  Hah.  :)  Or
    at least
     > fast enough to raise some eyebrows.
     >
     >
     > Regards
     >
     > Matt-


    If you want to run in the Sport Class with a Midget Mustang, I would
    use an
    aluminum 20B.  A better place for the radiators is in the inboard
    leading
    edges.  I think this is actually a lower drag installation and you won't
    have to sit on those coolant lines.

    Steve Brazil


Rather than an Al 20b, I'd go with a turbocharged aluminum 13b.  It
would fit better, and probably fly better, and be plenty of horsepower.
I see a development path on the airframe starting with an O-200 (I have
one), moving to an NA P-Port Iron 13b, and then to turbocharged Al (if
I'm still having fun)..  I realize there's no replacement for
displacement however.


Thanks,

Matt-

You know Matt there are plenty of cheap Formula 1 airplanes for sale.
Here is the slickest one I have seen so far. Not necessarily for sale.

Paul Lamar

The Rotary Engine NewsLetter. Powered by Linux.
ACRE NL web site. http://www.rotaryeng.net
Copyright 1998-2006 All world wide rights reserved.