Seems to me if a bolt rusted into a timesert or Lock Tite was used the
timesert would unscrew it self out of the hole when the bolt was removed.
The key locking inserts address this problem but take up more space.
-- Paul Lamar ...No rotor no motor.

No Paul Locktite (blue) can be used with a Time Sert and they won't pull
out. Unless stud and bearing mount is used. The Keen-sert is a good
insert, but unless you have the room to double the size of the original
hole it won't fit.  I'll stop trying to convince everyone. I am getting
tired of trying to help people out on the inserts. I'll just say this
last time that the Time Sert is what I would use, and GM would use, and
what Kawasaki would use and many others. Your milage may vary use what
ever you think is best.
Bill Jepson


The Rotary Engine NewsLetter. Powered by Linux.
ACRE NL web site. http://www.rotaryeng.net
Copyright 1998-2006 All world wide rights reserved.