SNIP

 Paul,

 You indicated the need for a bottom Tap on the blind hole in the
 housing. If you continue to deepen hole for the tap, it will enter
 the Case Bolt Hole in the housing. This should not be a problem.
 See attachment.

 Bill,

 How high is the insert collar above the top surface when installed?

 Joel

True.

Zero if you don't use Timeserts. Timeserts require a counter bore so the
collar is flush.

-- Paul Lamar ...No rotor no motor.

Time sert supplies a counter bore tool to set the sert flush to the top
surface.
Bill


Thats it last word!!!!!!!!!!

Paul Lamar ...No rotor no motor.

The Rotary Engine NewsLetter. Powered by Linux.
ACRE NL web site. http://www.rotaryeng.net
Copyright 1998-2006 All world wide rights reserved.