>> Paul,
>>
>> I've been thinking about the turbo compound idea a bit since we
>> talked about
>> it last Sunday. I'm thinking that the exhaust turbines used for a
>> turbocharger aren't really that well suited for putting horsepower
>> into the
>> crankshaft. They are designed to spool up quickly and optimized
>> for driving
>> a centrifugal compressor.
>>
>> I was looking at the turbocharger used on the P-38 and the B-17 and
>> it's
>> fairly large in diameter with the exhaust exit well away from the
>> shaft so
>> the force on the blades work a longer moment arm. I think it also
>> turns much slower. I'm thinking a configuration like this would be
>> much more efficient for our purposes and would allow normal
gears to
>> feed the power to the crank.
>>
>> Steve Brazil
>>
>> Perhaps something like this? Cheaper and more durable than building
>> a two liter four cylinder turbo charged 500 HP piston engine. It
>> should burn at least 5% less
>> fuel per HP generated than the very best piston engines, given
>> there is at least
>> as much wasted energy in the exhaust as comes out of the engine
>> shaft.
>>
>> Paul Lamar
>
>
> Yes! I've always thought this was the best idea proposed. It's
> concentric with the motor and could use a planetary, if needed, to
> transfer power to the e-shaft. The new larger rotary would allow a
> larger diameter turbine still and slow the revs.
>
> Chris Cosman
>
> Due to the large diameter of the turbine and the high RPM of the
> rotary I don't think the turbine needs gearing.
> --
> Paul Lamar ...No rotor no motor.
Okay, so what would it take to implement this approach? Custom
casting?
Is it necessary for the blades to be tapered or could they be made
from a
high quality stainless extrusion, just cut them to length and devise a
'keeper' to hold them in the ring?
The beauty of the hollow blades is they pump a bit of cool air down the
inside (like a furnace fan) and keep themselves cool.
To me this seems like the kind of 'bolt on' edge the rotary needs to
wipe
out the competition.
Chris Cosman
Just get a turbine out of a R3350 TC for a start. Not optimum but it
would
prove the concept. The blades are hollow for air cooling.
--
Paul Lamar ...No rotor no motor.
Paul:
Clearly a concentric turbine is not as simple as any of the previous ED
models of it imply.
You have a whole host of problems to solve, beginning with the
fundamental
design of a suitable turbine. Running one at 6,000 to 9,000 rpm is not
particularly efficient, considering the exhaust gas mach number. I
haven't
checked, but I doubt that the 3350 turbine runs that slow. And then,
of
course, you are faced with significant mounting and bearing cooling
issues
when you make it concentric with the engine's output shaft.
If you solve the mounting issues, you still have to deal with an
over-running situation when either the engine and/or the turbine
suddenly
change speed due to throttle changes. If you look at the Pratt &
Whitney
PT-6 twin engine recombining gearbox (I have a copy of the patent
drawings
if you're interested) you'll see just one implementation of a
solution to
this problem. It's fairly complex, involving numerous gears and flex
mounts.
Still, a self contained turbine with some form of recombining gearbox
arrangement appears much more feasible than any concentrically mounted
turbine.
Regardless of which method is chosen, I doubt that it would be
economical
when compared to the cost of the core engine!
George Lazik
Depends on the price of gas. Turbo chargers are cheap.
I am definitely interested in those dwgs George. Are they scanned?
Can you scan them in quarters?
--
Paul Lamar ...No rotor no motor.
Is the recombining PT6 a Soloy?
Can't you slow the gas by expanding (diverging) the flow? Don't know
how that works at transonic velocities.
Regards,
Matt-
Paul,
That engine with the turbine in the front is VERY close to what I was
thinking about, but I was thinking about having it on the side driving some
90 degree bevel gears on the accessory end of the engine. It would have
blades like a common turbocharger turbine but have the inlet and exhaust
well away from the shaft like the one pictured. This would allow a long
path for the gas to expand and a long moment arm to slow the thing down to a
usable speed. I was also thinking that it might be good to have a sprag
clutch to allow the engine to wind up quicker.
Steve
The Rotary Engine NewsLetter. Powered by Linux.
ACRE NL web site.
http://www.rotaryeng.net
Copyright 1998-2007 All world wide rights reserved.