Subject: Super simple and cheap mechanical fuel pump.
From: Rotary Engine
Date: 10/13/2007, 3:35 AM
To: AARotary Engine

The trick is: make a special bolt for the front of the e-shaft
and cantilever the pump off this bolt and its own input shaft.
No pulleys.
No drive gears.
No Belts.
No mounting brackets.
The dash 4 AN hoses keeps the pump from rotating.

You turn the shafts out of pinion wire.

I made a small version of this on a cheap Chinese
mill and lathe only. NC tooling would speed the
process. Worked great for a small oil injector.
-- 
Paul Lamar ...No rotor no motor.

The Rotary Engine NewsLetter. Powered by Linux.
ACRE NL web site. http://www.rotaryeng.net
Copyright 1998-2007 All world wide rights reserved.