This is a well established mechanical fuel injection
system.

http://www.precisionairmotive.com/

Read the pdf file on how it works. It is very similar to what I am
doing but mine will not cost $2000.

Also I think this unit will be limited to about 160 HP due to the size of
the
venturi and will require a four runner intake manifold and plenum. Not a
p-port.

Paul Lamar ...No rotor no motor.



Paul,
That injection is available for more than 200hp and there is also Airflow
Performance

http://www.airflowperformance.com/

These guys will build anything you want.  It may not be cheap, but it will
work, you will get into the air that much faster and have one less system
that needs tinkering.

Steve

I agree.