Paul,

Alodined the tubes and roughed up the housings and applied the JB Weld
using a heat gun to pre heat the tubes, during mixing and after
application,  I want to assemble the motor to see where the slide
throttle will mount as I build the cowling.

Joe Berki

That looks good Joe. Pressure check them for leaks before you
assemble the engine.

Paul Lamar ...No rotor no motor.

The Rotary Engine NewsLetter. Powered by Linux.
ACRE NL web site. http://www.rotaryeng.net
Copyright 1998-2007 All world wide rights reserved.