Subject: Plugs
From: Rotary Engine
Date: 10/19/2007, 9:19 AM
To: AARotary Engine





<This is a picture of the aluminum plugs I made for the oil injector
<holes and clamp to hold the two fuel injector plugs in.
<Does anybody know where the serial number is stamped on the Renesis
<engine?  I need it to get an "N" number for my plane. According to the
<RX7 manual (13B) the number is stamped on the left front side under the
<alternator but I have looked all over the Renesis and drew a blank.
<Karibian

Hi Karibian,
FWIW, unless you are actually ready to fly, "reserve" an N number rather
than "get" an N number cause the FAA will notify your state, who in turn
will notify your town, who will in turn notify you that TAXES ARE DUE ON
YOUR AIRCRAFT : )              Dave M


The Rotary Engine NewsLetter. Powered by Linux.
ACRE NL web site. http://www.rotaryeng.net
Copyright 1998-2007 All world wide rights reserved.