P&W Geared Turbofan Assembled, Ready For Ground Tests
Thu, 01 Nov '07
Targeting Double-Digit Reductions In Fuel Burn, Emissions
Enginemaker Pratt & Whitney tells ANN it has completed assembly of a
full-scale Geared Turbofan engine at the company's Engine Center in
Middletown, CT and shipped it to the company's Advanced Test Facility in
West Palm Beach, FL. The engine will begin ground testing early next month.
"This is an exciting time at Pratt & Whitney as we watch our next
generation product, the Geared Turbofan engine, begin its validation
testing program," said Bob Saia, vice president, Next Generation Product
Family, Pratt & Whitney. "To date our 15 technology rigs have
demonstrated that the Geared Turbofan engine components are operating at
or above our expectations. This demonstrator engine will validate
performance at the full engine level and demonstrate the game-changing
characteristics of the Geared Turbofan engine."
Pratt & Whitney says a Geared Turbofan engine will deliver a 12%
reduction in fuel burn, 50% reduction in noise and emissions, and 40%
reduction in maintenance costs over today's commercial engines.
Ground testing of the Geared Turbofan demonstrator engine will continue
through May 2008 and flight testing will begin in mid-2008 on the Pratt
& Whitney 747 flying test bed.
http://www.aero-news.net/news/commair.cfm?ContentBlockID=50485527-b194-467c-b1b5-d83b9c35be4b&Dynamic=1
<http://www.aero-news.net/news/commair.cfm?ContentBlockID=50485527-b194-467c-b1b5-d83b9c35be4b&Dynamic=1>
I wonder how big they can make a fan and how slow they have to turn it
before it makes more sense to just take the duct off. At the 0.8Mach
cruise speed they're running. The P180 Avanti cruises at 460mph on
apparently stock PT-6's.
Matt-
The Rotary Engine NewsLetter. Powered by Linux.
ACRE NL web site.
http://www.rotaryeng.net
Copyright 1998-2007 All world wide rights reserved.