Subject: rotary aircraft power
From: Rotary Engine
Date: 11/15/2007, 9:26 AM
To: AARotary Engine


Hi Paul,
I am building a KR2s and have a 6port 12a which will go into the KR2s.
Came across your post in the KRnet and thought great.
Was going to Corvair power my KR though hard to come by in Australia.
Had rotary for a while which was my first choice to power my machine
before hearing about the corvair.
Would love to join your newsletter as it is now concrete that my KR will
be rotary powered.
Regards,
Richard Mulford


That engine is a bit heavy for the KR2. I don't recommend a Mazda based engine
for that aircraft. I hate to be a party pooper. There is a new all aluminum rotary engine on the
market that may work out to be better. If you can wait awhile and work on the airplane
until people get a little flying experience with the Rotamax that may be a
better choice. www.rotamax.net
Paul Lamar


Hi Richard,

I'm also building a KR2S with a rotary, but will be going single rotor
with aluminum side housings. This will give me the 100 - 120 hp (turbo)
and the weight we need. I think 2 rotors is a bit heavy and you can get
the power out of one if you p-port it  or turbo.... So why sacrifice the
weight of your passenger to carry the iron sides and/or extra rotor?
I'm not certain  the aluminum sides are available today for your 12a,
but they are on the shelf for the 13b.

-dave Arbogast




The Rotary Engine NewsLetter. Powered by Linux.
ACRE NL web site. http://www.rotaryeng.net
Copyright 1998-2007 All world wide rights reserved.