Paul,

Here is my second try at the Renesis Intake manifold.  This one is equal
length runners.  the runners are 27" long.  The the primary runners are 1.5"
dia.  and the secondary runners are 2" dia.  I should know in a few days if
it works.  It is a 6 intake port engine, I combined the two secondary ports
of each rotor into one 2" runner.

Rino Lacombe
Rotary powered Glass Goose



The Rotary Engine NewsLetter. Powered by Linux.
ACRE NL web site. http://www.rotaryeng.net
Copyright 1998-2007 All world wide rights reserved.