Subject: Simple Stand-Alone Ignition -- WAS: Re: RX8 p-port pictures.
From: Rotary Engine
Date: 11/19/2007, 10:52 PM
To: AARotary Engine



The engine goes maximum rough and a ton of fuel air mist
eight feet high appears over the carb intakes.
...

I was pleasantly surprised to find out the 2nd gen front cover
water pump and ignition distributor fits the RX8 engine with a change
to a 2nd gen drive gear on the nose of the RX8 e-shaft.
That makes for a very simple stand alone ignition system.
--  Paul Lamar ...No rotor no motor.

Paul -

1) We want pics of that 8' mist demon.

2) 2nd gen front cover & Renesis compatibility is good news.  Is this
news?  Or did someone (but not us) already know this?  IIRC, the 2nd
gen front cover provides for a low height water pump, right?

3) Stand-Alone Ignition should be discussed further ... or is there
history of that discussion that I missed?  Options include:
 - a) Magneto
 - b) Simple sensor-triggered coil firing (sensor->transistor->coil)
 - c) Complex microcontroller solutions (picaxe, etc.)

-Vince Orton

Actually the RX8 water pump is the best.

Some of the ignition options have been discussed.

Here is another picture of the mist.
-- 
Paul Lamar ...No rotor no motor.

The Rotary Engine NewsLetter. Powered by Linux.
ACRE NL web site. http://www.rotaryeng.net
Copyright 1998-2007 All world wide rights reserved.